90x40x15 mm ferrite ring magnet – 90 mm OD, 40 mm Hole, 15 mm Thick, grade Y35, uncoated ferrite. Approx. pull force 5.2–8.7 kg (12–19 lb) on thick steel. Supplied by Aso Dükkan, Istanbul, Turkey – request a quote for international orders.
- Size: 90x40x15 mm (90 mm OD, 40 mm Hole, 15 mm Thick)
- Grade: Y35
- Pull force: approx. 5.2–8.7 kg (12–19 lb)
- Coating: Uncoated (ceramic surface)
- Max. operating temperature: Max. 220 °C (428 °F)
What Is a 90x40x15 mm Ferrite Ring Magnet?
The 90x40x15 mm ferrite ring magnet is a ring with a 90 mm outer diameter, a 40 mm centre hole and 15 mm thickness, made of Y35-grade hard ferrite. It is an economical, corrosion-resistant magnet that keeps working at high temperatures.
Ferrite (ceramic) magnets are made by sintering iron oxide with strontium or barium carbonate. The straight centre hole lets you fix it with a screw, bolt or pin, or slide it onto a shaft. They need no coating, do not rust and can be used up to 220 °C. Their pull force is lower than neodymium magnets of the same size, but they cost much less. Magnetisation is axial, with the poles on the large flat faces.
Technical Specifications
| Product | Ferrite Ring Magnet |
|---|---|
| Outer diameter | 90 mm |
| Hole diameter | 40 mm |
| Thickness | 15 mm |
| Tolerance | ± 0.2 mm |
| Material | Strontium/barium ferrite (ceramic) |
| Grade | Y35 |
| Coating | Uncoated (ceramic surface) |
| Max. operating temperature | Max. 220 °C (428 °F) |
| Magnetisation | Axial (poles on the large flat faces) |
| Pole marking | None (N/S not marked) |
| Pull force (perpendicular) | Approx. 5.2–8.7 kg (12–19 lb) |
| Shear force (vertical surface) | Approx. 1.1–1.9 kg (2.5–4.2 lb) |
| Surface field | Approx. 600 gauss (0.06 T) |
| Remanence (Br) | 0.40–0.41 T (4.0–4.1 kG) |
| Coercivity (Hcj) | 180–200 kA/m (2.3–2.5 kOe) |
| Max. energy product (BHmax) | 30–32 kJ/m³ (3.8–4.0 MGOe) |
| Weight | approx. 375.2 g per piece |
90x40x15 mm Ferrite Ring Magnet Pull Force
On a thick (at least 10 mm), flat steel plate, the 90x40x15 mm Y35 ferrite ring magnet has a pull force of approx. 5.2–8.7 kg (12–19 lb) when pulled straight off. On a vertical surface its resistance to sliding is roughly 20–25 % of that, about 1.1–1.9 kg (2.5–4.2 lb). The field at the centre of the pole face is about 600 gauss.
Because the hole reduces the contact area, the value is slightly lower than for a solid magnet of the same outer size. Real-world holding force depends on conditions: paint, plastic, fabric or an air gap reduce it quickly – with small magnets even a 1 mm gap can halve it – and thin, rusty or rough steel holds less. The figures are calculated estimates for ideal conditions; allow a safety margin in critical applications.
Compare Similar Sizes
| Size | Approx. pull force |
|---|---|
| 60x32x8 mm | 1.6–2.7 kg (3.6–6.0 lb) |
| 70x32x10 mm | 2.6–4.4 kg (5.8–9.7 lb) |
| 80x40x15 mm | 4.4–7.3 kg (10–16 lb) |
| 90x40x15 mm (this product) | 5.2–8.7 kg (12–19 lb) |
| 100x60x15 mm | 4.5–7.6 kg (10–17 lb) |
| 100x60x20 mm | 6.2–10 kg (14–23 lb) |
| 120x60x20 mm | 8.6–14 kg (19–31 lb) |
Applications
- Loudspeaker and audio magnets
- Magnetic separators and holders
- Workshop and industrial fixing
- School and physics experiments
Not a toy; keep away from children. People with pacemakers should keep a safe distance. Read all safety warnings →
How to Order
Prices are not listed for international buyers. Use the WhatsApp or Request a Quote by E-mail buttons on this page and tell us the quantity and delivery country; we reply with a price, lead time and shipping options. Minimum order quantity: 20 pcs. Browse more sizes in the ferrite ring magnets category.
Frequently Asked Questions
What is the pull force of a 90x40x15 mm ferrite ring magnet?
On thick, flat steel and pulled straight off, it holds approximately 5.2–8.7 kg (12–19 lb). This is the maximum under ideal conditions; paint, thin sheet metal, rough surfaces or an air gap reduce it.
How much weight does it hold on a vertical surface?
On a vertical steel surface a magnet resists sliding with about 20–25 % of its perpendicular pull force – roughly 1.1–1.9 kg (2.5–4.2 lb) for this size. For heavier loads use a larger magnet or several magnets.
What is the centre hole for?
The 40 mm straight hole is for fixing the magnet with a screw, bolt or pin, or mounting it on a shaft. Use a washer and do not overtighten.
How do I identify the north and south poles?
The magnets are not pole-marked; the poles are on the large flat faces. The north-seeking end of a compass needle points to the magnet’s south pole, or you can compare with a magnet whose poles you know – like poles repel, opposite poles attract.
Ferrite or neodymium – which should I choose?
Neodymium magnets are roughly 7–10 times stronger than ferrite magnets of the same size. Ferrite magnets are cheaper, need no coating, do not rust and work up to 220 °C.
Do you ship internationally, and what is the minimum order?
Prices are given on request. Send us the quantity and your country via WhatsApp or e-mail and we will reply with a quote, lead time and shipping options. Minimum order: 20 pcs.
Türkçe


















